Naturevape are pleased to offer The Edd Balance, a stunning side by side mod suitable for tanks of up to 24mm. The chip is the very same as the Easy...


Free shipping on all orders over £40 (this offer applies to the UK only)

100% MONEY



Availability: 18 In Stock

Naturevape are pleased to offer The Edd Balance, a stunning side by side mod suitable for tanks of up to 24mm. The chip is the very same as the Easy mod.

Product introduction
Stratum Balance Style 60W TC VW Box Mod powered by single 18350 / 18500/ 18650 battery (not included),Long side by side version with 18650 battery or short version with 18350 battery, supports max. 60W output.Compatible with 24mm diameter vape atomizer.The activation button and the adjustment button are perfectly integrated into the attractive design and can be adjusted laterally. Stratum Balance Style is made from POM/PC and Stainless Steel.

Battery:18350 / 18650(not included)
Power Output:1-60W
Display: 0.91"
Thread Type: 510
Input Current: 0.5A-30A
Output Voltage: 0.5V-8V
Resistance: 0.1ohm-3.0ohm
Coil Material Supported: Ni / SS / Ti
Efficiency: 91%
Temperature control range: 100'C-315'C / 200'F-600'F

-Powered by 1 x 18350 / 18500/ 18650 battery (battery not included)
-Compatible with 24mm diameter atomizer
-Made from POM/PC and Stainless Steel.

Package includes:
1 x Stratum Balance Sty18500/ le 60W Box Mod

Customer Reviews

Based on 11 reviews
john aston
edd balance 60w side by side mod

the edd balance 60w mod is a lovely little mod can be used different sized battery witch is perfect for different sized rta a mod i have enjoyed using thank you

Mark Morrison
Edd balance

Amazing mod. Looks and performs superbly!

Paul Goodall
Very happy

Really like the mod it's a hell of a lot better made than a lot of the mainstream brands like the chip in it I just do watts time only thing I will say is two of my clone tanks don't don't fit but not the end of the world money well spent

Adrian Mason
Very Chuffed after a small repair 👍

I am a temperature control vaper and a bit of a DNA75C snob and so I didn't expect this to be good at TC. At first that proved true as ohms always seemed high and if I tried to vape with anything over 20 watts preheat, I got burnt hits. Today I undid the bottom screws to take the Mod apart to figure out exactly which board might fit. I failed to get the bottom plate to budge, but with the Top Plate hanging on the negative wire, I noticed that the screw for the entire negative connection was very loose. Twisted the Top Plate clockwise 720⁰ until tight and put it back together. Now my ohms read 0.06 lower and temperature control is flawless 👍

I can't give it 5 stars because of that and the lack of manual. I couldn't even find one online, so below let me share what I have found out and what I have figured out.

Brad Stocker said: "If you push the PLUS & MINUS to go into POWER LOCK mode and then press PLUS or MINIS twice, it will go into Temperature Control Modes for you to cycle through"

I discovered: 5 click to lock Mod and then hold FIRE & PLUS to locks Ohms. While still in LOCKED MODE hold PLUS & MINIS goes into Watt output for TC Mode. I also believe that one should choose the mode before attaching tank or RTA to the Mod.

Temperature Control is not just for avoiding dry hits! 8 out 10 e-liquids taste better to me with Stainless Steel coils and 9 out of 10 of my Stainless Steel builds give me better flavour in Temperature Control Mode. The only time a Stainless Steel coil doesn't make TC mode is when the wire, RTA or Mod aren't playing nice and then that build works best in variable Voltage mode and never ever in Wattage Mode for Stainless Steel.
If you are curious about TC do try it with Stainless Steel and connect the RTA at Room Temperature, make sure the ohms are correct and lock them in. Make sure that wattage is about correct for coil and start at low temperature like 100⁰C and increase until you like the vape, now it should stay that flavour until your cotton or coil is spent. Long puffs require TC IMO.

Edd Balance Mod

I cannot add more to what the other reviewers have said. A lovely little mod.... The only negative is that one of mine has the protective ring missing at the bottom of the battery barrel, thus exposing the wire connection (bad quality control) - however, the mod, so far, works fine.

Just added to your wishlist:
My Wishlist
You've just added this product to the cart:
Go to cart page